digitech guitar processors
How to make my Marshall stack part of a stereo guitar sound set up…?
I have a Marshall JCM900 Dual Reverb head and a Marshal 4×12 cab. I also have an old Digitech GSP2101 effects processor. Now bear in mind that I barely know an input from an output or a pre amp from a power amp. What additional equipment do I need to hook up speakers to my amp set up to get a stereo sound. Is it as simple as getting a PA system and hooking it up to the back of amp head? I think that some of the chorus sounds from my effects processor would sound great in stereo. I used to do this through a old home stereo receiver and speakers but that can’t be good. Can anyone suggest the equipment/ products to make this all happen? Thanks in advance for any responses..
you’re going to need another speaker cabinet and a power amp for the digitech.then you can use an a/b box to run them in stereo or single.you should put the digitech and power amp into a rack together.you should get at least a 4 space rack because most power amps use two spaces and the digitech also uses two i believe.
DigiTech Vocalist Live 4 Harmony Processor Demo
|
|
DigiTech RP250 Guitar Processor $229.95 Accessing superbly detailed new amp models has never been easier than with the Diti Tech RP250 Modeling Guitar Pedal! There are three easy steps to dial in the perfect sound with Digi Tech’s Tone and Effects library knobs1. Pick one of 30 tone presets, 2. Pick one of 30 effects chains, 3. Dial in your effects level and rock on. You may never go any deeper into the infinitely – tweakable RP interfa… |
|
|
DigiTech RP55 Multi-Effects Processor Guitar Pedal, Guitar Tuner, Drum Machine $49.95 The RP55 is equipped with 11 Amp Models and 20 Studio Quality Effects, up to 8 effects can be used at once for unimagined tonal possibilities. The RP55 is the easiest RP product to use; just simply dial up your choice of amps and preset effects settings with no deep parameter settings. All settings come from Digitech’s years of experience with the pros. The RP55 has a 24-bit A/D/A conversion so th… |
|
|
AC to AC power adapter for DigiTech RP250 Guitar Processor AC to AC power adapter for DigiTech RP250 Guitar Processor Specification Input :100-240VAC (50-60Hz) Output: 9Vdc 1.5Amp… |
|
|
AC to AC power adapter for DigiTech RP200 Guitar Processor AC to AC power adapter for DigiTech RP200 Guitar Processor Specification Input :100-240VAC (50-60Hz) Output: 9Vdc 1.5Amp… |
|
|
DigiTech unveils RPx400 modeling guitar processor. (Product News).: An article from: Music Trades $5.95 This digital document is an article from Music Trades, published by Music Trades Corp. on March 1, 2003. The length of the article is 581 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation DetailsTitle: DigiTech un… |
|
|
DigiTech GSP-21 PRO Guitar Signal Processor Owner’s Manual … |
0 Responses
Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.